ZMH-GJ-90矽膠生産線
ZMH-GJ-90 silicone production line
用途:
無錫擠出機,适應于生産矽膠電線,電纜及管套等。
特點:
1、PLC+觸摸屏操控,全程控制,調整,監控生産線各工藝參數及傳統控制兩種。
2、本生産線是針對矽膠配有專用螺杆,螺缸,機頭,眼模及配套防止内部硫化結構。
3、配備矽膠專用機頭和水冷系統。
4、配備精密檢測反饋控制系統,生産線速度的穩定性,控制的靈敏度及精度均有良好的保障,減少了線徑,及絕緣厚度的誤差,大大降低了成本。
5、出現速度:10-200m/min
Application:
Suitable for production of silicon wire,cable pipe sleeve.
The features:
1.PLC+Touch screen control, whole process control adjust, monitoring all technological parameters in the production line. Another type is traditional control.
2. This production line is for Silicon rubber, equipped with special screw, screw cylinder, the nose, eye die the prevent internal vulcanization structure.
3.Equipped with Silicon rubber special head water cooling system.
4.Equipped with precise detection feedback control system.production line speed stability, sensitivity controlment precision are good security, reduce the wire diameter insulation thickness error, greatly reduced the cost.
5.Out-line speed:10-200m/min
主要技(jì )術參數 Main technical specification
機型 Model | ZMH-70mm | ZMH-90mm | ZMH-120mm | |
導體尺寸 Conductor size | Φ1.5mm-Φ6.0mm | Φ2.0mm-Φ10.0mm | Φ3.0mm-Φ12.0mm | |
成品尺寸 Finished size | Φ1.8mm-Φ8.0mm | Φ3.0mm-Φ14.0mm | Φ6.0mm-Φ30.0mm | |
動力 Power | 380V 3相 4 線,30KW 380V 3phase 4 line,30KW | 380V 3相 4 線,45KW 380V 3phase 4 line,45KW | 380V 3相 4 線,75KW 380V 3phase 4 line,75KW | |
擠出量 Extrusion output | 80KGS/HR | 135KGS/HR | 200KGS/HR | |
引取形式 Capstan type | 雙輪引取/履帶牽引機 Double wheel /caterpillar | |||
收線形式 Take-up type | 雙軸收線機 Double shaft take up | 大軸收線機/端軸收排線機 Big shaft take up/end shaft take up | ||
溫度控制系統Temperature control system | 水冷+電子管加熱保溫 water cooling+tube heat keep warm |
地址:上海市青浦區白鶴鎮鶴如路185号
技(jì )術支持:遠亞科技(jì )